G-simba n300v5-A LED Ratidza Simba Simba Simba
Chigadzirwa chikuru kuratidzwa
| Simba rekubuda (W) | Rated Input Voltage (Vac) | Rated kubuda Voltage (vdc) | Kubuda kwazvino Range (A) | Precision | Ripple uye Ruzha (mvp-p) |
| 300 | 200-20 | +5.0 | 0-60.0 | ± 2% | ≤150 |
Mamiriro ekunze
| Chinhu | Kutaurwa | Unit | ONA |
| Tembiricha yebasa | -30 ~ +60 | ℃ |
|
| Kupisa tembiricha | -40 ~ +80 | ℃ |
|
| Hunyoro Hunyoro | 10 ~ 60 | % |
|
| Kutonhora rudzi | kuzvidzora |
|
|
| Kumanikidzwa kwemhepo | 80 ~ 106 | Kpa |
|
| Kureba pamusoro pegungwa | 2000 | m |
Maitiro emagetsi
1) maitiro ekuisa
| NO | Chinhu | Kutaurwa | Unit | ONA |
| 1.1 | Input voltage | 200 ~ 240 | Vachiseka |
|
| 1.2 | Input Frequency | 47 ~ 63 | Hz |
|
| 1.3 | Anoshanda | ≥80 (vin = 220VC) | % | yakazara-mutoro kubuda mune yakajairika tembiricha |
| 1.5 | Simba Faceor | ≥0.52 |
| Yakazara-Inotakura Kubuda muRated Input Voltage |
| 1.6 | Max yekuisa ikozvino | ≤3.0 | A |
|
| 1.7 | Kutanga Kuvhiya Zvazvino | ≤60 | A | Cold State Test |
2) Kuburitsa hunhu
| NO | Chinhu | Kutaurwa | Unit | ONA |
| 2.1 | Rakarererwa voltage | +5 | Vdc |
|
| 2.2 | Kubuda kwazvino | 0 ~ 60.0 | A |
|
| 2.3 | Output voltage adj range | 4.6 ~ 5.4 | Vdc |
|
| 2.4 | Voltage kudzora rate | ± 1% | Vo | Zvichakadaro bvunzo muRexer mutoro, hafu yekutakura, yakazara mutoro pasina kusanganisa |
| 2,5 | Ipa rate rate | ± 1% | Vo | |
| 2.6 | Voltage Reging Erting | ± 2% | Vo | |
| 2.7 | Ripple & ruzha | ≤150 | MVP-P | Rated Input, yakazara mutoro unobuda, 20mhz bandwidth, 47μf capacitor yakaenzana mukuremerwa |
| 2.8 | Boot kubuda kunonoka | ≤3000 | ms |
|
| 2.9 | Kubuda nguva | ≥10 | ms | Vin = 220VC bvunzo |
| 2.1 | Output voltage rinosimudza nguva | ≤50 | ms |
|
| 2.11 | Kuchinjisa overshoot | ± 5% | Vo | Mamiriro Ekuyedzwa: Yakazara Mutoro, Mode cr |
| 2.12 | Dynamic kubuda | Shanduko yeVoltage yeisingasviki + 5% vo; Dynamic Mhinduro nguva≤250us | Vo | Mutoro 25% -50%, 50% -75% |
3) hunhu hwekudzivirira
| NO | Chinhu | Kutaurwa | Unit | ONA |
| 3.1 | Input pasi pekudzivirirwa voltage | 140 ~ 175 | Vachiseka | Mamiriro Ekuyeti: Yakazara Mutoro |
| 3.2 | Input pasi peVoltage Dziviriro Point | 160-180 | Vachiseka | |
| 3.2 | Kubuda zvazvino kudzikisira nzvimbo yekudzivirira | 66-90 | A | Hi-mukombe burp kuzvidzora, kudzivirira kukuvadza simba nguva refu mushure mekapfupi dunhu |
| 3.3 | Kubuda ropa pfupi redunhu rekudzivirira nzvimbo | > 60.0 | A |
Ongorora: Kamwe chero kudzivirirwa kunoitika, nyika ichivhara. Kana simba rikadzokerazve, richeka pamasekondi maviri, uye wobva waisa pamusoro, simba ratangazve.
4) humwe hunhu
| NO | Chinhu | Kutaurwa | Unit | ONA |
| 4.1 | MTBF | ≥40,000 | H |
|
| 4.2 | Kusvetuka zvazvino | <1.0ma (vin = 220VC) | GB88898-2001 9.1.1 Fest Nzira | |
Chengetedzo hunhu
| Chinhu | Tsanangudzo | Tech Spec | Ronga | |
| 1 | Simba remagetsi | Input kuti ubudise | 3000vac / 10ma / 1min | Hapana kusimuka, hapana kuputsa |
| 2 | Simba remagetsi | Kupinda pasi | 1500vac / 1000 / 1min | Hapana kusimuka, hapana kuputsa |
| 3 | Simba remagetsi | Kubuda pasi | 500VAC / 1000VAC / 10MMA / 1Min | Hapana kusimuka, hapana kuputsa |
Curve yedata data
Input voltage vs mutoro cURVE
Tembiricha vs mutoro curve
Kushanda zvakanaka vs Load curve
Mechanical Hunhu & Connector Tsanangudzo (Unit: mm)
1) Yemanyorerwe dhizaini l * w * h = 212 × 81.5 × 30.5 ± 0.5
2) Kuisa Gomba Kuyerwa
ONA:
Yakatarwa screw kutsanangurwa ndeye m3, huwandu hwe6. Iyo yakatarwa screws mumagetsi emagetsi haigone kupfuura 3.5mm.
Kuzivisa Kwakachengeteka
1. Kana iri isingasviki 8mm, pvc gasket goket ± 1mm inodiwa kuti ishedze insulation.
2) Kubata kwakananga kuputika kwekutonhora neruoko kunorambidzwa.
3) Iyo bolt diameter ndeye ≦ 8mm paunenge uchiisa PCB ndiro.
4) Unoda mato kunze l285mm * w130mm * h3m aluminium seyebenzi
