G-energy JPS200P Kuchinja Simba Supply 200W Kubuda kweIndoor Kunze Rental LED Display Screen.
Product Main Specification
Output Power (W) | Rated Input Voltage (Vac) | Rated Output Voltage (Vdc) | Output Current Range (A) | Precision | Ripple uye Noise (mVp-p) |
200 | 90-264 | +5.0 | 0-40.0 | ±2% | +5.0 ≤200mVp-p @25℃ |
Environment Condition
Item | Tsanangudzo | Tech Spec | Unit | Remark |
1 | Kushanda tembiricha | -30—60 | ℃ | Tarisa kushandiswa kwezvakatipoteredza tembiricha uyeload curve. |
2 | Kuchengetedza tembiricha | -40—85 | ℃ | |
3 | Hunyoro hwehukama | 10—90 | % | Hapana condensation |
4 | Heat dissipation nzira | Natural kutonhora |
|
|
5 | Air pressure | 80— 106 | Kpa |
|
6 | Kureba kwegungwa | 2000 | m |
Electrical Character
1 | Input character | ||||
Item | Tsanangudzo | Tech Spec | Unit | Remark | |
1.1 | Rated voltage | 100-240 | Vac |
Tarisa kushandiswa kwezvakatipoteredza tembiricha uyeload curve. | |
1.2 | Input frequency range | 50—60 | Hz |
| |
1.3 | Kubudirira | ≥88.0 (220VAC,25℃) | % | Output Full Load (pakamuri tembiricha) | |
1.4 | Efficiency factor | ≥0.95 |
| Rated input voltage, goho rakazara mutoro | |
1.5 | Max kuisa ikozvino | ≤3 | A |
| |
1.6 | Dash current | ≤100 | A | Cold state test @220Vac | |
2 | Output character | ||||
Item | Tsanangudzo | Tech Spec | Unit | Remark | |
2.1 | Output voltage rating | +5.0 | Vdc |
| |
2.2 | Output current range | 0-40.0 | A |
| |
2.3 | Output voltage inogadziriswa range | / | Vdc |
| |
2.4 | Output voltage range | ±2 | % |
| |
2.5 | Kurongeka kwemutoro | ±2 | % |
| |
2.6 | Voltage kugadzikana kurongeka | ±2 | % |
| |
2.7 | Output ripple uye ruzha | ≤200(@25℃) | mVp-p | Rated input, output mutoro uzere, 20MHz bandwidth, mutoro wedivi uye 47uf/104 capacitor | |
2.8 | Tanga kunonoka kubuda | ≤3.0 | S | Vin=220Vac @25℃ bvunzo | |
2.9 | Output voltage kusimudza nguva | ≤100 | ms | Vin=220Vac @25℃ bvunzo | |
2.10 | Switch machine overshoot | ±5 | % | Test mamiriro: mutoro wakakwana, CR mode | |
2.11 | Output dynamic | Kuchinja kwemagetsi kuri pasi pe± 5% VO;the dynamic nguva yekupindura iri pasi pe250us | mV | LOAD 25%-50%-25% 50% -75% -50% | |
3 | Dziviriro hunhu | ||||
Item | Tsanangudzo | Tech Spec | Unit | Remark | |
3.1 | Input under-voltage kudzivirira | 60-80 | VAC | Mamiriro ekuedzwa: full load | |
3.2 | Input under-voltage recovery point | 75-88 | VAC | ||
3.3 | Output current limiting protection point | +5.0V,>48 | A | Self-kupora | |
3.4 | Output short circuit kudzivirira | +5.0V, Kuzvidzora | A | ||
4 | Humwe hunhu | ||||
Item | Tsanangudzo | Tech Spec | unit | Remark | |
4.1 | MTBF | ≥50,000 | H |
| |
4.2 | Leakage Current | <1(Vin=230Vac) | mA | GB8898-2001 bvunzo nzira |
Production Compliance Hunhu
Item | Tsanangudzo | Tech Spec | Remark | |
1 | Kusimba Kwemagetsi | Input kune zvabuda | 3000Vac/10mA/1min | Hapana arcing, hapana kuparara |
2 | Kusimba Kwemagetsi | Kupinza muvhu | 1500Vac/10mA/1min | Hapana arcing, hapana kuparara |
3 | Kusimba Kwemagetsi | Output kusvika pasi | 500Vac/10mA/1min | Hapana arcing, hapana kuparara |
Relative Data Curve
Ukama pakati pekupisa kwemamiriro ekunze uye mutoro
Input voltage uye load voltage curve
Kutakura uye kushanda zvakanaka curve
Iyo mechanika hunhu uye tsananguro yezvibatanidza (chikamu: mm)
Dimensions: kureba× width× kureba=208×59×30±0.5.
Gungano Makomba Dimensions
Attention For Application
1,Simba rekupa kuti ive yakachengeteka insulation, chero rutivi rwesimbi shellnechokunze kunofanira kuva kure ne 8mm yakachengeteka chinhambwe.Kana isingasviki 8mm inoda kupedhi 1mm ukobvu pamusoro pePVCsheet kusimbisa iyoinsulation.
2, Kushandiswa kwakachengeteka, kudzivirira kusangana neinopisa, zvichikonzera kuvhunduka kwemagetsi.
3,PCB bhodhi inokwira gomba stud dhayamita isingadariki 8mm.
4,Inoda L315mm*W200mm*H3mm aluminium ndiro seyebetsero singi yekupisa.